Nut Jar e-P II

e-P Vessel II

My post on the e-P Vessel series I am developing shows the first vessel in it's different stages of construction. Explanation of the series title, "e-P Vessel ..." is that the "e" stands for some variety of empty vessel I will use as a core in the art pieces. The "P" stands for the promise of creating an artful vessel based on the recycling of plastic, glass, wood, etc. throw-away containers. That first e-P Vessel was based on an empty wine bottle. The subject of this post, e-P Vessel II, is based on the nut jar at left. You may have noticed it isn't quite empty but we can take care of that detail in short order. I discard the blue lid and remove the label.

A wood box is constructed to cover all sides including top and bottom.  An opening in the top wood piece fits close  around the container's opening. Large slices of grape vine trunk are affixed, one to each flat side and a smaller variety of Manzanita sections cover the remaining surface area.  A black resin is used to fill space between all wood pieces.

After the resin has cured all surfaces are sanded smooth and flat.  The corners are also rounded.  As a result of this sanding, areas will be exposed where the resin hasn't completely filled spaces between woods segments.  Refilling and sanding solves that problem.

The sanded surfaces were covered with masking tape for protection as we shape a clay model of the top and cast a plaster mold over it.  The clay was removed and the mold was filled with tinted red and blue resin that results in the variegated lavender cast top.  The mold was ground away and the finish sanding began.  When the tape was taken off there were little spots that need repair, but that was easy with matching colored resin.  The key to a beautiful piece is not to stop sanding too soon.  Sanding is the process of turning big scratches into small ones.

The finish I like and have used on most of my wood art pieces is several coats of oil rubbed in; and finish with at least two coats of paste wax, buffing each coat before applying the next.  This gives a finish that can be spot refinished if damage occurs and it will blend perfectly.                              

So there you have it;  e-P Vessel II.  I have been thinking about writing a book about this series when I have more pieces finished.  It seems like an endless subject.  I would give more detailed information about the construction, similar to the way e-P Vessel I was covered in my first book, "Unique Vessels:  How do you make those things?"  You can check that out in my book shown on this blog.  Other vessels are shown on my web site.  Watch for other e-P Vessel's posted here and on facebook and Pinterest.



Edwin K. Hill
apatchablue3@comcast.net
Web site;   apatchablue.com
Blog:  Apatchablue Studio
Pintrset:  (to be announced)